Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
This Part Fits:
| Year |
Make |
Model |
Submodel |
| 1974-1983 |
Jeep |
Cherokee |
Base |
| 1981-1982 |
Jeep |
Cherokee |
Chief |
| 1983 |
Jeep |
Cherokee |
Pioneer |
| 1974-1977 |
Jeep |
Cherokee |
S |
| 1978-1980 |
Jeep |
Cherokee |
Wide Track |
| 1983 |
Jeep |
Cherokee |
Wide Track Chief |
| 1984-1991 |
Jeep |
Grand Wagoneer |
Base |
| 1984-1985 |
Jeep |
Grand Wagoneer |
Limited |
| 1975-1988 |
Jeep |
J10 |
Base |
| 1975-1988 |
Jeep |
J20 |
Base |
| 1975-1982 |
Jeep |
Wagoneer |
Base |
| 1982-1983 |
Jeep |
Wagoneer |
Brougham |
| 1975-1976 |
Jeep |
Wagoneer |
Custom |
| 1979-1983 |
Jeep |
Wagoneer |
Limited |
